5
LH5210 and LH5410 Front Panel
9. LIMITER LED
– The indicator light will illuminate when the LIMITER switch is engaged.
10. DIRECT OUT -
Use this electronically balanced XLR jack to route signal from the Model LH5210 and LH5410 to a
professional mixing console or as a tap to a main PA system via a mic input on the console. The signal output from
this jack is low impedance (100 ohm) with an output level of approximately -30 to -20 dB. You can also use the Direct
Out jack to route signal to an external amplifier with a -10 dB input sensitivity.
11. Fan Filter –
Removable sponge filter covering the amplifier’s cooling tunnel vent. The Fan Filter can easy be
removed and cleaned.
12. BRITE switch –
Use this switch to turn on the LH Series’ BRITE circuit, which when engaged, adds a pre-set eq
curve to enhance the bass instrument’s high-end response.
13. Limiter switch -
This switch is used to engage the LH Series Limiter circuit. The LH Series Limiter is an automatic
dynamics processors used to control the level from reaching clipping. Use the Limiter to even out the loud
transients that can cause distortion. Using the Limiter will also help protect your speaker system
14. Power switch -
Use this to power the Model LH5210 and LH5410 on or off. The internal power LED lights
whenever the Model LH5210 and LH5410 is powered on.
