14
Instructions for use
WARNING!
When folding and unfolding the chassis there is a risk of injuries due
to jamming. Take care that you keep your child‘s body parts at a safe distance.
Unfolding the carriage
Lift the handle
1
until the two lateral handle catches
2
have engaged.
WARNING!
Before using the pram, make sure all catches are locked.
Folding the pram
Turn the twist grip
3
inwards and push at the same time the telescopic handle to
the stop. Then, pull the two unlocking levers
21
at the same time upwards and fold
the chassis downwards.
Height-adjustable Telescopic handle
Turn the twist grip
3
inwards and slide the handle
1
in the desired position until
it engages on both sides.
Changing the rear wheels
Release the parking brake
7
. Depress push button
4
and pull the wheel off. Push
the wheel right to the axle‘s stop, while pressing down the button. Make sure, all
wheels are held in place properly.
Lock-type-swivel wheels
Turn the caps
5
so that the red point becomes visible to
pre-select the straight-line motion mode, which will be
activated the moment the wheels point in forward direc-
tion. Turn the caps
5
so that the green point becomes
visible to release the swivel lock. To remove the wheel,
press the push-button
6
in the centre of the cap
5
and
pull the wheel off the holding device. To assemble the
wheel, insert the fastening pin in the holding device,
and engage it by a forcible push, which is indicated
by a click sound. On extremely uneven surfaces, and
when going very fast, we recommend locking the swivel
movement, to prevent the wheels from blocking.
Parking brake
Push the red brake button
7
to engage the brake. Having parked the pram, try
to push it to check the brake. Push the
green brake button
7
to release the brake.
WARNING!
Make sure the brake is always
closed when placing the baby in the carriage
or taking it out of it.
Adjustable suspension system
By turning the selector
7
, a „hard“ or „soft“
position can be selected for suspension.
7
5
6
8
