5
Assembly Instructions
Step 1
Cut out all material using the Lumber & Sheet Cut Layout Guide.
Step 2
Take the (4) 1”x 3” x 23-13/16” front and back stiles
and mark points for countersink holes. Follow
the diagram for hole locations and be sure to drill
holes on the correct edges (see diagram).
Drill countersink holes in boards so you have (2)
sets of symmetrical stiles.
Step 3
Mark points for the countersink holes on the (2)
1” x 2” x 17-5/8” inner top rails and the (2) 1” x 2”
x 13-7/16” inner bottom rails. Follow diagram for
measurements.
Drill countersink holes in both sets.
7"
7"
1-1/2"
1-1/2"
3"
1"
3" 1"
3"
1"
3" 1"
(X2)
(X2)
17-5/8"
13-7/16"
