HART HPRS03, Operator'S Manual

Page: 6 / 28

6 – English
FEATURES
ASSEMBLY
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-776-5191 for assistance.
WARNING:
Do not attempt to modify this product or create acces -
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
APPLICATIONS
You may use this product for the purposes listed below:

Cutting all types of wood products (lumber, plywood,
paneling, composition board, and hard wood)

Cutting masonite and plastic

Cutting drywall

Cutting metals such as sheet steel, pipe, steel rods, alu -
minum, brass, and copper
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 9.
To install:

Lock the switch trigger by sliding the lock-off button into
the locked position.

Insert the battery pack into the product as shown.

Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured before
beginning operation.
To remove:

Lock the switch trigger by sliding the lock-off button into
the locked position.

Depress the latches on each side of the battery pack and
remove the battery pack from the tool.
For complete charging instructions, see the operator’s
manual for your battery pack and charger.
WARNING:
Do not allow familiarity with products to make you care -
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always remove battery pack from your tool when you
are assembling parts, making adjustments, cleaning, or
when not in use. Removing battery pack will prevent ac
-
cidental starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
OPERATION
Stroke Length ............................................................................................................................................................. 1-1/8 in.
No Load Speed .................................................................................................................................................. 0-2,900 SPM
PRODUCT SPECIFICATIONS