Introduction
Your Hart Dynamics Electracoustic® Drum System is the result of years of research and develop-
ment and represents the most comprehensive electronic drum system available. Easy enough to
use for the beginning drummer with features that allow the most advanced user flexibility never
before available. To assure proper set up, take full advantage of your drum set’s functions, and to
enjoy long and trouble free use,
please review the Features and Set-up sheet provided with
each HDI instrument, Hardware Rack Set-up Guide, Hart Recommended Module Settings,
Cable Reference Guides and Set up instructions in this Manual carefully for simple, quick
set up.
We have provided this protective laminate binder so you can compile all of the individual
product guides and store this information for future reference. All of the information necessary to get
you playing quickly is provided here. We suggest that you read your drum module owners manual
for additional information. Knowing about how the gear you are using functions will help you get the
most out of your set and provide the most enjoyment and capabilities.
How to Use this manual
This Set-up Guide is designed to help you configure your drumset to the “power on” stage as well
as provide all necessary information to configure most popular drum modules. Please refer to your
Drum Module Owner’s Manual for advanced playing and programming. Our Rack Set-up page and
Drum Module Parameter Reference Charts will provide additional assistance for quick set up. After
basic operation is achieved, you may want to “fine tune” settings to your personal style and taste.
Conventions
TRS
stands for Tip / Ring / Sleeve.
This is the same as a “stereo” jack,where one input, output or cable can carry two signals at the
same time.
Drum Rack Set-up
Your HART DYNAMICS Electracoustic® Drumset comes with the hardware rack set-up sheet for
ease of set up.We have provided the set-up sheet so you have a picture for reference. You may set
your drumset up to suit your personal taste.
NOTE:
Module mounts for virtually all modules are included with your drumset. Single rack space
modules (Alesis D4,DM5 and DMPro) use the two “rack ears” while Roland and Yamaha modules
mount with the HW-MT-TD10 module mount plate and HW-URCL rack clamp.
During the following assembly, we recommend you tighten each clamp only enough to hold it in
place. After complete assembly and positioning, it is then recommended you tighten each clamp
securely.
Disclaimer:
All Company and Product names, numbers, models and/or Trademarks in this manual are assumed to be registered and are the
property of their respective commercial entities. HDI makes no claims to endorse or recommend any of the above which might be
mentioned. HDI reserves the right to change any information at any time, and assumes no responsibility for any damage or injury that
occurs from information in this manual. Setting up this drum set and/or using it constitutes that you agree to these terms of use and
will hold HDI harmless. HDI makes no warrantees either expressed or implied other than our product Lifetime Guarantee.
Thank You.