Product:
Code:
SHE-011/016/021/026/031/036/041/046
Premier
Curved Team Shelter
Socketed
20
11
4
22
20
18
Figure 14.
Figure 13.
9.) To attach the seats (4) to the horizontal
support line up the holes in the seat with the
holes in the support and use BOL472 (22) and
BOL722 (20) to fix through. Fix tightly using
BOL402 (18).
Note: When the seats are in position within the
shelter finish off by inserting the seat plugs
(packed with the seats), to cover the bolt heads.
These may need to be knocked in using a
rubber mallet.
10.) Line up the holes in the horizontal seat support (13) with the holes
in the top of the individual seat support frames (10). You will notice that
the seat support will be a ‘snug’ fit within the shelter. Insert BOL450 (24)
through the hole in CAP097 (16) and then insert through the hole and
attach BOL715 (19) and BOL402 (18) on the bottom (Figure 15).
Tighten all 3 bolts and then push CAP096 (15) into the top of CAP097
to cover the bolt head.
Note: At this stage all the bolts that have previously not been tightened
will now need to be tightened up.
Page 6
22
24
16
19
18
15
8.) Attach the end seat supports (11) to the
horizontal seat support (13) by fixing through the
brackets with BOL472 (22) and fixing with a skiffy
washer and nylock nut (Figure 13).
Note: The foot plates on the end supports can be
used as additional anchor points if in windy or
exposed conditions.
Figure 15.
13
18
13
20
