6
STEP 3
1.
Next install the front support bracket # GB507-1222 see figure 3.
2.
Remove 3 of the transmission oil pan bolts that correspond to where the bracket will
go.
3.
Using the 3 Hex head bolt #DF990-3112SS, flat washers #DF990-SAE31 and lock
washers #DF990-31Z1. Loosely attach the front bracket to the Hydra-drive.
4.
Using 3 spacers #MC507-9251 and 3 flange head screws #DF990-6025MM attach to
the transmission oil pan.
5.
Tighten bolts. 5/16 bolts to 17 ft. lbs. and the 6mm bolts to 8 ft. lbs.
Figure 3
Summary of Contents for Hydra-Gen HU507-GB12
Page 9: ...9 Figure 6 ...
