Harris RF-7800B-DUO24, Operation Manuals

Page: 63 / 96

4-10
RF-7800B
CONFIGURATION
R
terminal. If the IMSI is not displayed, it indicates that there is a problem reading the SIM card. Possible problems
could be: no SIM, SIM installed incorrectly, or Personal Identification Number (PIN) must be entered.
UE Class : The RF-7800B-DU024 Land Portable Terminal is a Class 2 BGAN Terminal. The RF-7800B-VU104
Land Mobile is a Class 10 BGAN Terminal.
USIM PIN Status : Displays the PIN status as Ready if a valid PIN is entered. The PIN is used to unlock the USIM
every time the terminal is powered up or reset. Entering a PIN into the Web interface stores the PIN in the terminal
(see
Figure 4-4 ). If the USIM requires a PIN at startup, the terminal will use the stored PIN.
USIM APN Name : Is pre-populated with the default Access Point Name that has been provisioned on the USIM
card. Some USIM cards may have multiple APN's provisioned on them.
Extract System Log : Click this button to automatically extract a system log from the BGAN terminal and save the
file to a location on the computer for debugging purposes. This file can be e-mailed to Harris directly for fault
analysis.
Restore Factory Defaults : Click this button to restore the BGAN terminal back to factory defaults and delete any
parameters that have been changed. Try all possible debug procedures before using this feature. Contact Harris for
additional help if necessary.
Figure 4-6. BGAN Terminal Properties