2
175-100067-00 Edition A (December 2008)
Copyright © 2008, Harris Corporation
CCS-NET-24 Initial Setup Guide
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
7. At the password prompt, press the
Enter
key. By default, there is no password.
Note
If you must establish a password, use harris (all lower-case) as the password
for consistency with other Harris-supplied switches.
8. Continue pressing
Enter
(to accept the switch’s default settings) until the switch
command prompt appears.
The session will appear as follows
1
:
login:
admin
password
: <
Enter
>
ExtremeXOS
Copyright (C) 2000-2007 Extreme Networks. All rights reserved.
Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482;
6,618,388; 6,034,957; 6,859,438; 6,912,592; 6,954,436;
6,977,891; 6,980,550; 6,981,174; 7,003,705; 7,017,082;
7,046,665; 7,126,923; 7,142,509; 7,149,217; 7,152,124;
7,154,861.
====================================================
Press the <Tab> or ‘?’ key at any time for completion.
Remember to save your configuration changes.
This switch currently has all management methods enabled for
convenience reasons.
Please answer these questions about the security settings you
would like to use.
Telnet is enabled by default. Telnet is unencrypted and has
been the target of security exploits in the past.
Would you like to disable Telnet? [y/N]: <
Enter
>
SNMP access is enabled by default. SNMP uses no encryption,
SNMPv3 can be configured to eliminate this problem.
Would you like to disable SNMP? [y/N]: <
Enter
>
All ports are enabled by default. In some secure applications,
it maybe more desirable for the ports to be turned off.
Would you like unconfigured ports to be turned off by default?
[y/N]: <
Enter
>
1
Text emitted by the switch appears in constant-pitch font. Characters/keys typed into the switch terminal appear
in bold constant-pitch font.
