Harris ADC 100 User Manual Download Page 108

Page: 108 / 128

Harris ADC Device Server User’s Guide

8-4

Requester Configuration

No Events Less Than (Mins)

Select a minimum number of minutes allowed for an event. Default is 0 minutes.

Only Record Events with ID in _ to _.

Select a range (minimum and maximum) for allowable IDs to be recorded. Any IDs that
fall outside the specified range will not be recorded.

Routing Tab

Routing Modes

Use this tab to define the potential delivery mode for material to a destination device.

Baseband

: Real time video signal (either analog or digital). Baseband includes SDI and

SPIT modes. Default is enabled.

Fibre

: JPEG or MPEG compressed data files. Fibre mode is typically used when

both

the

source and destination devices are video disks. Fibre transfers are typically non-realtime.
Default is disabled.

Archive

: Usually a SCSI connection between the archive system and the video disk server.

This mode is used when the source device is a digital archive device (e.g., a StorageTek or
Ampex DST) under control of an Avalon Archive Manager. Default is disabled.

Summary of Contents for ADC 100

































































































































Search results

Summary of Contents for ADC 100

Reviews:

Related manuals for ADC 100

Brands by name

Popular brands

Harris ADC 100, User Manual

Search results

Summary of Contents for ADC 100

Reviews:

Related manuals for ADC 100

Brands by name

Popular brands