49
3.8
Pre-operational Checks and Trial Operation
3.8.1
Refer to the trolley's Nameplate and record the Code, Lot and Serial Number in the space provided on
the cover of this manual.
3.8.2
Refer to the hoist's owner's manual and perform all pre-operational checks for the hoist.
3.8.3
Perform pre-operational checks for the trolley:
Confirm the adequacy of the rated capacity for all slings, chains, wire ropes
and all other lifting attachments before use. Inspect all load suspension members for damage prior
to use and replace or repair all damaged parts.
Ensure that trolley is properly installed on the beam, and stops for the trolley are correctly
positioned and securely installed on the beam.
Ensure that all nuts, bolts and split pins (cotter pins) are sufficiently fastened.
3.8.4
Confirm proper operation.
Before operating read and become familiar with Section 4 - Operation.
Before operating ensure that the hoist (and trolley) meets the Inspection, Testing and Maintenance
requirements of ANSI/ASME B30.16.
Before operating ensure that nothing will interfere with the full range of the trolley’s (and hoist’s)
operation.
3.8.5
Proceed with trial operation to confirm proper operation.
Operate the trolley though it's full range of motion. Make sure the trolley runs smoothly and does
not bind. If applicable check the power/Air supply and festoon system for proper operation
Perform inspections per Section 5.3, “Frequent Inspections”.
