22
Figure 3-9 Model SH
Figure 3-10 Model ES
3)
Refer to the appropriate product owner’s manual parts list and associated diagrams for the hoist.
4)
Single Fall Units – Remove the Top Hook assembly by removing the Split Pin from the Slotted Nut.
Remove the Slotted Nut, pull out the Top Pin, and remove the Top Hook. Replace with Suspender E,
replace Top Pin, Slotted Nut and Split Pin. Be sure to bend Split Pin ends of the Split Pin away from each
other sufficiently so the Split Pin remains captive in the Top Pin. Refer to
Figure 3-11
or
Figure 3-12
for the
appropriate product. Attach hoist to the trolley.
5)
Double Fall Units (except 5 Ton ES) – Remove the Top Hook assembly by removing the Spilt Pin from the
Slotted Nut. Remove the Slotted Nut, pull out the Top Pin L from the Connection Yoke, and remove Top
Hook. Replace with Suspender E, replace Top Pin, Slotted Nut and Split Pin. Be sure to bend Split Pin ends
of the Split Pin away from each other sufficiently so the Split Pin remains captive in the Top Pin. Refer to
Figure 3-11
or
Figure 3-12
for the appropriate product. Attach hoist to the trolley.
6)
5 Ton ES – This hoist couples to the trolley by hook mounting the hoist to the trolley’s suspension shaft. As
shown in
Figure 3-13
.
