PROBLEM
POSSIBLE FAULT
REMEDY
Engine vibrates excessively
Mounting bolts loose.
Tighten bolts
Cutterblade bolt loose.
Tighten bolt
Cutterblade out of balance.
Balance cutterblade
Bent crankshaft.
Consult your dealer
Uneven cut
Undulating ground conditions
Change direction of travel
Cutterblade worn
Sharpen the cutterblade
Cutterblade out of balance
Balance the cutterblade
Wheels / roller damaged
Inspect and replace as necessary
Discharge chute blocks
Grass is wet
Mow dry grass
Cut height too low
Increase cut height
Grassbag full
Empty grassbag
Airflow through the
Clean the grassbag
grassbag is restricted
Engine speed too slow
Set throttle to fast position
Mower is hard to push
Cut height too low
Increase cut height
Wheels / roller damaged
Inspect and replace as necessary
Mower will not self propel
Clutch out of adjustment
Adjust clutch cable
Drive belt damaged
Replace drive belt
Poor grass collection
Airflow through the
Clean the grassbag
grassbag is restricted
Discharge chute blocked
Remove blockage
Wet grass
Mow dry grass
Grassbag full
Empty grassbag
Engine speed too slow
Set throttle to fast position
TROUBLE SHOOTING
1.26
