Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Engine Handbook.
2. Warranty Reg. Card.
3. Grassbag.
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Move the cutterblade stop lever away from the engine to
avoid damage and unfold the handlebar to the operating position.
Tighten both handlebar knobs to secure the handlebar in position.
Take care to ensure that the control cables do not become snagged at
the pivot point.
Unscrew the two larger knobs at base of handlebar sufficiently to allow
it to be moved to the upper, middle or lower position. Ensure both
sides are set to the same height and secure in the required position.
Raise the rear deflector, lower the grassbag through the handlebar and
hook in position. Lower the deflector to rest on the grassbag
ASSEMBLING THE MOWER
Handlebar
Delivery Checklist
Adjust Handlebar Height
Grassbag Attachment
1.9