Harrie Leenders HL2 Instructions for Installation, Use and Maintenance
5
General instructions and regulations
Maintenance
Have the appliance serviced regularly by a qualified technician.
Ensure that the fluegas connection and the chimney are cleaned regularly.
Check to ensure that the chimney is still open before lighting the stove again if it has not been
used for an extended period of time.
If, in spite of the precautions taken, there should occur a chimney fire (usually
accompanied by a roaring noise in the chimney), proceed as follows:
Shut off the air supply and close the door of the stove immediately
Call the fire brigade
Quickly extinguish the fire in the stove with sand to prevent smoke from getting into your house
Ventilate the house
Never use water to extinguish the fire
Ensure that after a fire the chimney is first swept and inspected for any damage and leaks.
Service
It is not allowed to make any modifications to the appliance without prior authorization of the
manufacturer.
Only use replacement parts recommended by the manufacturer.
Declaration
The undersigned, representing the following:
Harrie Leenders Haardkachels, Industrieweg 25, 5688 DP, Oirschot, Nederland
herewith declare that the product HL2 is in conformity with the provisions of the following EC
Directives when installed in accordance with the installation instructions contained in the product
documentation: EN 13240:2001/A2:2004 (E) "Roomheaters fired by solid fuel"
Product: Roomheaters fired by solid fuels as covered under the scope of this standard intended
use: Space heating in residential buildings.
Characteristics Report
Fire safety
2005PMC/12
Emission of combustion products
2005PMC/12
Release of dangerous substance
2005PMC/12
Surface temperature
2005PMC/12
Mechanical resistance (to carry a chimney / flue)
2005PMC/12
Thermal output / energy efficiency
2005PMC/12
Description of the room heater HL2:
Wood stove made of sheet metal. The stove is designed to be installed on the wall. It is provided
with a selfclosing window door, fixed secondary air supply and controllable air wash air
supply. The combustion chamber is insulated with refractory ceramic elements. The fluegas
connection is located at the top of the appliance.
Notified body:
SGS Environmental Services, Postbus 5252, 6802 EG Arnhem
Report number:
2005PMC/12
Manufacturer:
Harrie Leenders Haardkachels
Name: Bart Leenders
Position: General Manager
Date: 15072005
