Harrie Leenders Cylon, Instructions For Installation, Use And Maintenance Manual

Page: 21 / 26

Harrie Leenders Cylon ­ Instructions for Installation, Use and Maintenance
21
4. Levelling
Put the M10 socket­head bolts in the holes (see
detail).
Position the spirit level as shown in the picture.
Level the stove
2. Moving the stove
Put a cushion or blanket between the sack truck
and the stove.
Place the stove on the sack truck, its back resting
against the sack truck. Caution: not the side of the
door!
Then move the stove to the place of installation
desired.
3. Positioning the stove
If air is to be supplied through the floor, first take the
appropriate measures. See instructions given below
at 7.
Place sliding pieces under the stove (4x).
Carefully push the stove in its correct position.
Allow for the minimum distance to flammable materi­
als.
Then remove the plastic protective cover and the
sliding pieces.
1. Removing the packaging material
Carefully remove the packaging material (without
damaging the paint). Leave the plastic cover
wrapped around the stove.
Then press the loose bolts through the pallet.