To add more users, tap the plus sign (+) in the top right corner of the screen and follow the
same steps.
When you have created your user list, you may want to organize their files by creating
folders.
First, tap a user to open the main folder. Next, tap the plus sign and select from the menu
if you want to add a folder or a file from the Mountbatten. Tap Add folder... and when a
small box pops up, type the name of this new folder. Tap OK to finish.
Both the folders and files can be deleted when not needed anymore. First, tap the Edit
button next to the Add button (the plus sign). You will notice red round icons pop up on the
left-hand side. The Delete button will appear on the right-hand side when you tap on it.
Use this button to continue deleting. You will be asked again to confirm your decision. Tap
the Delete button to remove the item.
There is also another way to delete an item. After tapping the Edit button, tap on the item
you want to delete. A three-option menu will pop up. The topmost option is Delete. Tap it,
confirm your selection, and the item will be deleted.
The same method lets you move or rename the item. You can move a folder or a file to a
different user. When you have tapped the Move option in the menu, you will be given a list
of users where you can move the item to. Once you tap on a different user, the item (file or
folder) will be transferred to a new location.
Files stored in the User main folders or subfolders can be manipulated in several ways.
Once the file is tapped, a file menu opens up with the following actions:
• View – preview the content of the file
• Send to Mountbatten – send to Mountbatten Memory
• Move – move to a different location
• E-mail – send it by e-mail
• Emboss – emboss on the Mountbatten
NOTE: In the case of Send to Mountbatten and Emboss, if your MBMimic is not connected
to a Mountbatten, the connection process will begin before the selected action is executed.
Connecting to a Mountbatten Brailler
Before connecting to a Mountbatten Brailler, please make sure that the Brailler is turned
on and paper is loaded.
Tap on the Mountbatten tab at the bottom of the screen of your iOS device. The program
will be looking for any active Mountbatten in the vicinity. After a list appears, select the unit
you want to connect to. A connection screen will show up saying "Connecting to
Mountbatten". You should hear the Mountbatten beep several times, and after a few
seconds, your MBMimic will connect with the Brailler. Tap Done, and you will be taken to
the home screen.
Mountbatten Brailler Tutor User Manual v. 1.0.3
Page 59
