- Remote control
Here you may decide if remote control may be used. It is meant for future use.
- WiFi settings
Here you may set a wireless network password so that your unit gets connected to
the Internet. Please see the "Connecting to the Internet"
Section.
- Save current settings
It saves all settings that you may have set to the internal memory.
- Restore saved settings
Restores previously saved to internal memory settings.
- Restore default settings
Restores all settings to factory default.
- Developers
Meant for developers only; please don’t use this menu.
- Update device
If you have obtained an update file set on a USB drive, you may place it in the
upper USB socket on the right side of your unit and select this
menu option.
The system will update your unit and restart. The update may
include various parts of the system (like audio module, display
module, etc.) and may take several minutes (in case of audio
update even up to an hour). See Updating your Mountbatten
Brailler Tutor Section below.
- Update advanced module
If you have obtained an update file set on a USB drive, you may place it in the
upper USB socket on the left side of your unit and select this
menu option. You will be presented with a choice to use the
Internet to update the advanced features. For that, your device
must be connected to a local network with Internet access.
The update (either from USB or the Internet) may take several
minutes. See Updating your Mountbatten Brailler Tutor Section
below.
- Device information
Displays basic information on the unit - including its serial number, firmware and
bootloader version.
- Reset to factory settings
Resets the unit and erases all data from the device - a good thing to do when you
remit the device to a new owner.
Mountbatten Brailler Tutor User Manual v. 1.0.3
Page 27
