HK4400
SAFETY WARNING
Keep dipstick and oil fill cap secured
tightly. Engine oil may escape through
these orifices when engine is running
causing severe burns.
above 25
°C (77°F)
SAE30 or SAE10W-30
SAE15W-40
-10
°C - 25°C
(14°F - 77°F)
SAE10W-30
SAE15W-40
below -10
°C (14°F)
SAE10W-30
•
Filled with SAE10W-30 from the
factory, 6.0 L capacity, and change
after the first 50 hours. Then chance
engine oil every 200 hrs.
Fuel Components
•
Fuel Filter (302057) is located on the
left hand side of the machine beside
the radiator.
•
The fuel pump, in-line fuel filter, and
fuel shutoff are located below the fuel
tank. These components can be
accessed through the frame cutouts
between the two rear tires.
21
Fuel Filter
Fuse/Relay Panel
•
Located under operators’ console,
through the access door.
•
Refer to the parts section for electrical
schematic and other electrical
components.
Deck Maintenance/Service
Liner Inspection
•
The deck assembly and deck
transition assembly both include bolt-
on replaceable steel wear liners.
•
To access liners for inspection, raise
the hopper and install safety locks on
both lift cylinders.
•
Inspect wear liners every 250 hours.
Replace liners before it wears through.
The part number for the two deck
liners is 317311. When operating in
sandy conditions, inspect every 100
hours.
Fuel Pump
In-Line
Fuel Filter
Fuel Shutoff
