Debris Blower
R
R
Safety Information
Equipment & Controls
•
Altering this equipment in any manner
which adversely affects its operation,
performance, durability, or use will
void the warranty and may cause haz-
ardous conditions.
•
Know the location and function of
all controls and how to stop this equip-
ment quickly in an emergency before
you operate the equipment.
READ AND UNDERSTAND THE
OWNER’S MANUAL.
•
Keep all nuts, bolts and screws tight
to help ensure safe operation of this
equipment.
•
Use genuine factory parts or parts with
equivalent characteristics, including
type, strength and material. Failure to
do so may result in product malfunc-
tion and possible injury to the operator
and/or others.
•
Replace locknuts and locking screws
if you can tighten them without feel-
ing considerable resistance for sev-
eral turns before they are completely
tight. Replace them with factory autho-
rized parts or their equivalent.
•
If hardware is not secure, or if some
of the hardware is over-tightened,
equipment failure may result, posing
possible safety hazards.
Guards & Shields
•
Keep the equipment and attach-
ments in good operating condition,
and keep all safety devices in place.
Replace all worn, damaged, unusable,
missing or lost safety shields and
guards before operating the equip-
ment.
Safety Decals
•
If safety related or instructional decals
become illegible or are removed,
replace them immediately.
•
If you replace parts that have such
decals attached to them, make sure
the decals are replaced with current
versions, and that the decals are on
the replacement parts before the
machine is operated again.
•
New decals may be obtained from
your local Harper Dealer.
SAFETY WARNING!
•
To prevent possible eye injury, al-
ways wear SAFETY GLASSES while
servicing the equipment.
Before Operation
•
Before operating this equipment, read
and understand the Owner’s Manual.
•
Do not allow children to operate this
machine.
•
Never operate this machine in the
vicinity of bystanders.
•
Before servicing or inspecting the
machine, make certain that the power
source is shut down, make certain all
moving parts have stopped and
disconnect the PTO shaft.
5
Summary of Contents for Debris DB2700
