Harmopool Hydrolyse EC20, Manual

Page: 23 / 31

23
Extra : operational use and maintenance of the chlorinator
specification
1. The mixture and maintenance of water and salt the operational state and
maintenance of the salt chlorinator
1.1 The calculation of the amount of water:
Knowing the capacity of the pool is the first step when adding salt to the pool.
Rectangular pool: length (meters) x width (meters) x average depth (meters) = pool water
capacity ( cubic meters)
Round pool: diameter(meter) x diameter(meter) x average depth(meter) x 0.785=pool
water capacity(cubic meters)
Oval pool: length (meters) x width (meters) x average depth (meters) x 0.893= pool water
capacity (cubic meters)
Code Reason for failure Remark Solution
E6 The sensor in the
controller is not working
properly the error must be
corrected manually check if the corresponding temperature
sensor is attached, replace the sensor if this is
the case
E7 water temperature
sensor defective the error must be
corrected manually first check if the corresponding temperature
sensor is attached, replace the sensor if this is
the case
E8 the input voltage is too
high or too low the error must be
corrected manually change the nutrition
E9 Electrode malfunction the error must be
corrected manually contact the supplier for the repair
EA Electrode defect the error must be
corrected manually first check whether the electrode is fixed, if
so, replace the electrode
EB malfunction of the
storage vessel the error must be
corrected manually Contact the supplier for repair
EC system detection circuit
failure the error must be
corrected manually shutdown and restart, if the error does not
reoccur, the chlorinator should be turned on
normally; if this error occurs more than once,
contact the supplier for repair of the
controller