17
6/ Connect the power supply,
Wiring of the electronic board:
Power Wiring:
It is imperative that the equipment be switched on only after the installation is
completed and controller casing closed.
2.2 Factory settings
When the power is on, press the test button (until you hear a «beep» continuously).
The default configuration is as follows :
- Name : BODET-MAC address
- IP configuration by DHCP
- Multicast synchronisation (broadcast)
- Synchronisation address: 239.192.55.1
- Volume : level 5
- Zone number : 1
Power supply indicator :
LED ON (green) = device powered on.
LED OFF = no power.
Network indicator :
LED flashing green flash = connection to the network in
progress.
LED flashing green slowly = device connected to the network
LED flashing red slowly = loss of network connection or
failure to connect to the network.
Test button :
Pressing = the product emits a «bip».
Pressing at the power on = return to factory configuration
1st Louspeaker
2nd Loudsapeaker (ref: 907731)
Power supply 24VDC
Ethernet network RJ45
L: brown
N: blue
Earth: yellow/green
1
1
2
2
3
3
4
4
To electronic card 24VDC
5
5
6
6
7
8
9
9
8
7
