NETWatch Site Controller
PWRLink II 4800T Optical Transmitter Product Manual Rev A (2/02)
3–5
3.1.1
Transmitter Status
The Transmitter Status menu lets you obtain the transmitter serial number,
firmware version, and basic operating mode parameters.
3.1.2
Transmitter Setup
The Transmitter Setup menu allows you to:
•
Run the Autosetup routine.
•
Select Manual Gain Control (MGC) or Automatic Gain Control (AGC)
mode of operation.
•
Configure the transmitter in either CW or Video mode.
3.1.3
Transmitter Adjustments
The Transmitter Adjustments menu allows you to:
•
Adjust and optimize the RF pad settings
•
Restore all transmitter parameters to the original factory settings
3.1.4
Transmitter Alarms
The Transmitter Alarms menu displays the active alarms in the transmitter.
NOTE:
If an alarm condition is triggered in a specific transmitter module,
when that transmitter is selected through the HLP 4200WD interface,
the display automatically jumps to the alarm message within the
Transmitter Alarms menu.
3.2
NETWatch Site Controller
Harmonic’s NETWatch Site Controller provides a complete element
management system, including a Windows™-based GUI and
communications package for monitoring and controlling a network of
multiple PWRLink II transmitters either remotely or locally. For information
on installing and using this system, consult the
NETWatch Site Controller
Instruction Manual.
