Technical Specifications
PWRLink™ II 4100S Series Optical Transmitter Product Manual Rev A (3/06)
A–3
A.4 User
Interface
Front panel
Bi-state status LED: Normal = Green, Alarm = Red
Module selection indicator: Yellow LED
RF attenuation adjustment
Monitor point:
Flatness: ±0.5dB
Return loss: >16 dB
Connector type: Female F
Level: -20 ±1.5 dB below input
Rear panel
RF input connector type: Female F
Optical output (for connector types available, see Section A.8)
Element Management System—NETWatch Site Controller
HEM interface: RS-485, RS-232C connectors (in HLP 4200)
Carrier: Externally generated
A.5 Power
Requirements
Nominal: +24 VDC, supplied by HLP 4200 bus
Maximum: +28 VDC
Consumption: 22 Watts maximum
A.6 Environmental
Operating temperature
1
: 0
˚
to +50
˚
C / +32
˚
to +122
˚
F
Storage temperature: -40
˚
to +70
˚
C / -40
˚
to +158
˚
F
Automatic fan adjustment at: 40
˚
& 50
˚
C / 104
˚
& 122
˚
F
Relative humidity: Maximum 85% non-condensing
Software over temperature laser protection
1.
For operation over entire temperature range, subtract 3 dB from CSO and 2 dB from CTB.
