Stand Unit with Track in Hoistway and attach to wall
Bracket attaches to track
with 3/8-16 x 3/8" hex head
screw and a square nut
(inside slot of track)
Tip:
The square nuts are held
inside the track slots with
pieces of foam,
do not
remove the pieces of foam
until installation is complete.
Attach to wall with #14 x 2"
wood screws
Bracket Locations:
-6" from each end of track
-12" from each side of track splice
Note:
In some applications it may be
necessary to remove the car
from the trolley.
Stand the assembly up and into
place inside the hoistway
(
consult the application drawing for
proper placement
).
Square Nut
630-00092- Rev.
B
Summary of Contents for Ascent DW100
