Mount Cams on Track
Upper Limit
Cam
Notes:
• Bottom of the floor limit cams are located approximately 15" below the landing stop.
• Cams can be moved up or down to adjust the stopping position of the car.
• Switches are located on the car.
• The final limit is a safety that stops the operation of the dumbwaiter if the car should overrun the upper or
lower limit.
It disables all controls when actuated.
Upper Limit Cam
Lower Limit Cam
Middle Limit Cam
Sliding Cam
(
installed in step 4
)
48 3/4"
Track
Track
Layout for 2-Stop
Layout for 3-Stop
Upper Limit
Cam
Cam attaches to a
threaded ‘nut bar’ inside
the slot of the Track (
nut
bar is held in place by
pieces of foam
)
Lower Limit Cam
Final Limit
Cam
Final Limit Cam
Final Limit
Cam
Final Limit
Cam
Final Limit Cam
630-00092- Rev.
B
Summary of Contents for Ascent DW100
