Harmar Mobility AL600 Pioneer, Owner'S Manual

Page: 10 / 20

AL600 / AL600HD:
Owner’s Manual
19MAR2021 | MKT-000174 REV A
10
OPERATION
AL600 / AL600HD: SECTION 3
6.
Use the hand-held pendant controller or
optional wireless key-fob controller, to raise
and retract the platform into the stowed/travel
position. Start by activating the control with
the power button. The controller has two
operating buttons for raise and lower functions
that must be continually pressed to complete
the desired function. The controller has
integrated LED lights to aid in visibility when
using at night. See Figure 3-9.
Figure 3-9
PUDDLE LIGHTS (OPTIONAL)
LEDs will illuminate automatically when the platform
reaches its out position. The LEDs will stay on as
long as the platform is out of the vehicle. UP or
DOWN. Once the platform starts to travel
horizontally (inward), the LEDs will turn off.
See Figure 3-10.
Figure 3-10
If you plan on leaving the lift out / down for an
extended period of time and wish to turn off the
LEDs, turn the power OFF on the top of the control
box. See Figure 3-11.
Figure 3-11
UNLOADING YOUR
MOBILITY DEVICE
1. Open the rear cargo door. Double-check that the
mobility device did not shift during travel and is
properly secured on the platform. Stand to the
side of the vehicle and press the “Down” button
until the lift reaches the ground. See Figure 3-12.
Figure 3-12