background image

SOCKET SET

Specifically

WRENCH SET

Specifically

3/8”

7/16”

1/2"

9/16"

3/4"

7/16”

1/2"

9/16”

3/4"

ALLEN WRENCH

Specifically

1/8”

3/16”

5/16”

#2 FLAT HEAD

SCREWDRIVER

#2 PHILLIPS HEAD

SCREWDRIVER

WIRE CUTTERS

NEEDLE NOSE

PLIERS

MARKING

IMPLEMENT

TAPE MEASURE

 

11

SECTION 2 : INSTALLER

Preparation

TOOLS REQUIRED

PROFESSIONAL INSTALLATION RECOMMENDED

Installations may vary to some degree, but below are the basic tools to have on hand for an 

Outside Lift installation.
If you have any questions, concerns or comments, please contact our Technical Service 

Department at 800-378-6648 or [email protected] 

If you do not understand any portion of installation or 

operation, please consult our technical service department or 

authorized mobility dealer. Do not attempt to install or use this 

NOTE:

 The following section is designed for the professional 

installer. We strongly recommend that a certified dealer 

install the lift, configure the docking device, and instruct the 

user on correct operation as well as establish a Safety and 

Maintenance Schedule.

lift with any hesitation or question. 

Serious injury or damage can result if 

proper procedures are not followed.

Read & Understand this Manual 

Prior to Installation or Operation.

Having an overall understanding 

of the lift and proper installation 

techniques will help you save time, 

energy and avoid possible injury.

AL350 Hitch-Mounted Scooter and Power Chair Lift 

P/N: 610-00065

 Rev A

Summary of Contents for AL350





































Reviews: