HOW TO REMOVE YOUR AQUAJOY BATHLIFT FROM YOUR BATH TUB
• Empty the water from the bath.
• Press the “down” button on the hand control and take the bathlift to its lowest position in the
bath. Continue to press the down button until the backrest reaches an angle of approximately
27 degrees or more.
• Take hold of the two side flaps and fold them inward onto the seat.
• Take hold of the backrest and push it forward so that it lies flat on the seat (cover mat facing
down).
•
With the backrest folded forward on the bathlift seat, simply detach the backrest from the base by
lifting it upwards (as above). The backrest grooves will detach from the seat (base) grooves.
•
To remove the seat (base), place one hand on the lifting bar at the rear of the base and lift to release
the bathlift from the bath.
•
Continue to lift and the suction feet at the front of the bathlift will release automatically. Place your
other hand on the front of the bathlift and lift.
•
Continue to lift your bathlift base out of the bath and you can now store it away.
pg. 6
Summary of Contents for aquajoy premier plus bathlift
Page 1: ...your 03 26 2007 ...
Page 17: ...Intentionally left blank ...
