6
7
NANO SERIES - M08BT / M12BT
USER GUIDE
NANO SERIES - M08BT / M12BT
USER GUIDE
®
WARNING:
Read and follow all the SAFETY INSTRUCTIONS when setting up and operating the unit.
WARNING:
Disconnect the power supply before setting up the unit.
WARNING:
Under no circumstances should the mains earth be disconnected from the mains lead.
CAUTION:
Turn all the input and output controls down before connecting the unit.
Please refer to the “
Connection Example
” to set up your audio system with NANO Series mixer:
1. Completely disconnect the mixer and external devices from the power supply. Zero out or reset all the controls of the mixer,
including faders, gains, EQs, etc.
2.
Connect external devices, e.g. micro-phones, amplifiers, monitors, effects, etc., to the mixer.
3. Power on the system.
NOTE:
To power on the system, please power on the mixer first, then the amplifiers or powered speakers. To power off
the system, power off the amplifiers or powered speakers first, then the mixer.
4. If wireless transmission is needed, connect the mixer to a Bluetooth
®
audio device. (For more information, see “
e. P
LAY /
PAUSE or Bluetooth
®
” on Page
14
.
)
5. Set the Main Mix fader to no more than 0 dB.
6. Set the Control Room fader to no more than 0 dB.
7. Set the Channel Level fader to no more than 0 dB.
8.
While speaking to the microphone (or playing the instrument), turn up the Gain knob to an ideal level, but ensure the highest
transients do not trigger the PEAK LED, otherwise, slightly turn down the Gain knob.
9. Shape the tone of the channel using the EQ knobs.
10. Repeat Step 7-9 to set up each active channel.
11. When the Output Level meter registers the red segment, slightly lower the Main Mix fader.
Microphone
Electronic Guitar
Electronic Keyboard
Media Player
Bluetooth Device
USB Memory
Monitors
Main Speakers
PC
Amplifier
Footswitch
Headphone
Quick Start
Connection Example
