14 PC 45 Corn/Pellet Stove
Pellet Fuel Optimization
For optimal performance burning wood pellets, the pellet kit #1-00-06801 is
now included. This kit allows you to convert the PC45 into a fully automatic
pellet stove with 50,000 BTU capacity, fast ignition and clean viewing glass.
Since there may be changes needed for the circuit board programing, it is
recommended that this installation be completed by a trained service technician.
Be sure the power cord is un-plugged prior to adjusting circuit board switches.
The pellet kit contains the instructions for the conversion, a new burn pot end
gate, and a new combustion blower inlet ring.
This figure shows the corn burn
pot as installed from the factory.
This figure shows the new end
gate which gets installed without
the stirring rod.
This figure shows the pellet burn
pot after installing the new end
gate.
The combustion blower inlet ring on the left is the one originally installed in the stove. Note the larger opening
in the ring on the right. This allows the PC45 to produce more heat when burning pellets. The larger ring does
the opposite when burning corn. If you want to switch back to corn or grain, exchange the inlet ring back to the
smaller opening.
