5
P e l l e t s o r C o r n /P e l l e t M i xt u r e O n l y
P3 5 i F ireplace Insert
S a ve T h e se I n st r u ct i o n s
3-90-775R16_08/13
2 . Combustion Blower
Requires no lubrication.
eep the motor windings free of dust. Can be wiped
clean or vacuumed.
To remove combustion blower
• Slide the insert body out of the mounting frame.
• Locate the combustion blower motor in the back
right corner.
• Loosen wing screws and turn the blower and
mounting plate 1 turn.
• Lower the motor and paddle fan out of the blower
housing.
3 . ESP- (Ex haust Sensing Probe)
Remove and wipe clean with a soft cloth and glass
cleaner or alcohol.
To remove the probe
• Slide the insert body out of the mounting frame.
• The probe is installed on the side of the exhaust
chamber.
• With a 1 socket or driver, remove the screw that
attaches the probe.
• Pull the probe out of it s mounting hole.
1 . F eed Motor
Requires no lubrication.
eep the motor windings free of dust. Can be wiped
clean or vacuumed.
To remove feed motor
• Slide the insert body out of the mounting frame.
• Between the feed motor and the feeder body, you ll
see the cam block with a bearing that actuates the
pusher arm.
• With a 7 1 wrench, loosen the hex-head bolt in
the end of the cam.
• With the bolt loosened, the feed motor and its
mounting bracket will pull straight out of the auger
shaft.
Loosen bolt in end of
cam block
ESP location
