Harman Martin VDO Dotron, User Manual

Page: 27 / 40

Using the VDO Dotron 27
Testing, rebooting and returning to defaults
The table below lists the functions of the magnetic ‘control button’ on each VDO Dotron dot.
Test patterns are stored in onboard memory. This lets you test the LEDs without an external controller, but
test patterns can also be called up on P3 system controllers, the P3 PowerPort 1500 and the P3 PowerPort
1000 IP.
Action Function
Quick swipe The first swipe displays status as shown in Table 2 for a few seconds.
The next swipes display the following test patterns on the LEDs (each
swipe scrolls to the next pattern):
- Calibrated white
- Full red
- Full green
- Full blue
- Scrolling gradient
- Dimmed (20% raw white)
Hold magnet over
‘button’ until LEDs
light blue
Reboot the VDO Dotron.
Hold magnet over
‘button’ until LEDs
light white
Return the VDO Dotron to its default factory firmware.
Table 3: Magnetic ‘control button’ functions
www.audiovias.com