Tech note
2 of 8
MAC Viper Series - Replacing the air filter housing in the head, revision A, 05-16-2017
Before you begin
The purpose of this tech note is to describe how to
replace the old version of an air filter housing in the
head with a new air filter housing that is easier to
access.
Make sure that the following is available before you
begin: 2 x P/N 50300524, filter housing with lid (1).
Tools
•
Torx 20 screwdriver
•
Torx 25 screwdriver
•
PZ 2 screwdriver
•
ESD mat and wristband.
Figure 1: Filter housing with lid
Figure 2: Removing the head covers
Replacing the air filter
housing
Removing the head covers
1. Loosen the two Torx 25 screws (1) on each side.
2.
Remove the two head covers.
Figure 3: ESD mat and wristband
Take the necessary precautions
to prevent static electricity from
damaging the product during
modification or repair.
1
1
