Fixture setup
19
Manual control
The
MANUAL CONTROL
menu lets you reset the fixture and operate it without a DMX controller.
To execute commands in the
MANUAL CONTROL
menu, select the effect that you want to control, then
enter a value from 0 to 255 for 8-bit commands or 0 to 65536 for 16-bit commands to apply that command.
The menu items and values available correspond to the commands listed in the DMX protocol in this User
Manual.
When you exit the
MANUAL CONTROL
menu, the fixture will keep its effect positions and settings until you
enter a new menu. When you do this, the fixture will revert to default positions and settings. The fixture will
also revert to default positions and settings if you exit and then re-enter
MANUAL CONTROL
.
Service
Servicing the fixture and the contents of the
SERVICE
menu are covered in the MAC Ultra Wash Safety and
Installation Manual supplied with fixtures and available for download from the product pages on the Martin
website at www.martin.com.
Summary of Contents for Martin MAC Ultra Wash
Page 1: ...MAC Ultra Wash User Guide...
Page 35: ...www martin com...
