6
Exterior 400 Range user manual
Introduction
Thank you for selecting a product from the Exterior 400™ Range of compact IP65-rated LED-based
floodlights from Martin Professional™. The Exterior 400 Range includes the following models:
Exterior 400
• Optimized for long-throw applications in combination with very narrow beam angle optics
• 56 single-chip Cree XP-E LEDs
• RGBW (red, green, blue, white) and RGB color mixing, HSIC (hue, saturation, intensity, color
temperature) and HSI color management
Exterior 410
• Optimized for evenness of color mixing
• 22 multi-chip Cree MC-E LEDs
• RGBW and RGB color mixing, HSIC and HSI color management
Exterior 420
• Optimized for color temperature control
• Single-chip Cree XP-E warm white and cold white LEDs
Exterior 430
• Optimized for single-color, high-output applications
• Single-color, single-chip Cree XP-E LEDs
• Red, green, blue, warm white or cold white LEDs
• Color fine-tuning available on red, green and blue fixtures through use of auxiliary color LEDs
All Exterior 400 Range models feature:
• Diffuser filters for alternative beam angles
• Auto-sensing power supply unit with 100 - 240 V, 50/60 Hz operating range
• DMX 512A control (1 - 4 channels depending on fixture and control mode)
• Remote configuration and addressing over the DMX data link using Martin MUM™ software running on a
Windows PC and a USB/DMX hardware interface such as the Martin DABS1™.
For the latest light output measurements, firmware updates, documentation, product specifications and
other information about this and all Martin Professional™ products, please visit the Martin website at
http://www.martin.com
Comments or suggestions regarding this document may be e-mailed to [email protected] or posted to
Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.
Unpacking
The following items are included with the Exterior 400 Range:
• Adjustable mounting bracket
• Narrow, Medium and Wide diffuser filters (supplied separately)
• This user manual
Using for the first time
Before applying power to the fixture:
• Carefully review “Safety Information” on page 3.
• Check that the local AC power voltage is within the range listed on the fixture’s serial number label.
• Install the fixture as described in this manual
