Harman Lexicon MX400, User Manual

Page: 43 / 64

2. Press and hold the
Store
button until the white progress bar has
completely disappeared. This will complete the restore procedure and
the MX400 will be returned to its factory state.
The MX-edIT
TM
edIToR/LIbRARIAN
- WINdoWS
®
ANd MAC
®
The included MX-Edit Editor/Librarian software lets you create, edit, compare, save and
load reverb and effects programs for use with your MX400 on your Windows or Mac
computer. While the MX400 has a finite number of User program locations, you can
create and save as many programs as you like on your computer, and load them into
your MX400 via a USB or MIDI connection at any time.
The Mac and Windows versions of the MX-Edit Editor/Librarian are almost identical in
functionality. One noticable difference is the Editor window's position; it's fixed in the
Windows version, and free-floating in the Mac version. For additional differences and
features in the Mac version, refer to the readme.txt file on the CD.
INSTALLING The MX-edIT edIToR/LIbRARIAN
SofTWARe - WINdoWS
MInIMuM SySteM reQuIreMentS - WInDoWS
Before installing the MX-Edit Editor/Librarian software, make sure that your computer
meets the following minimum requirements:
• Pentium-III, 500MHz or better.
• Windows XP, Service Pack 2 or higher.
To install the included MX-Edit Editor/Librarian software in Windows XP, insert the
provided disc into your computer’s CD-ROM drive. You will be guided through the
installation process – just follow the on-screen instructions and prompts. Note that
you will be prompted to connect the MX400 via the USB port during the installation
process. In order for your computer to recognize the MX400 connection, it is necessary
to have the MX400 powered on and connected via a standard USB cable.
Important
: If you plug your MX400 into a USB port other than the one used during
the installation of MX-Edit software and drivers, you may need to run the USB driver
installer again. For your convenience, a shortcut to the USB driver installer is added to
the Start menu during the MX-Edit software installation. If you need to reinstall the
drivers, click Start->Program Files->Lexicon->MX-Edit->Reinstall Drivers, and follow
the installation prompts.
The MX-Edit Editor/Librarian - Windows
®
and Mac
®
35
MX400