www.jbl.com
E
ngli
sh
11
11 SPECIFICATIONS
Audio/ video
•
Maximum Power: 100 W
•
Frequency Response: 75 Hz - 20 KHz
•
HDMI Video Input: 3 (support 4K UHD, HDMI 2.0)
•
HDMI Video Output (With Audio Return Channel): 1 (Support
4K UHD, HDMI 2.0
•
HDCP Version: 2.2 and 1.4
Bluetooth
•
Bluetooth Version: 4.2
•
Bluetooth Transmitter Frequency Range: 2402 - 2480 MHz
•
Bluetooth Transmitter Power: 9 dBm
•
Bluetooth Transmitter Modulation: GFSK, π/4 DQPSK
Wi-Fi
•
2.4G Wi-Fi Transmitter Frequency Range: 2412 - 2472 MHz
(2.4 GHI ISM BAND)
•
2.4G Wi-Fi Transmitter Power: <20dBm
•
2.4G Wi-Fi Modulation: DBPSK, BPSK, CCK, QPSK, BPSK,
16 QAM
•
5G Wi-Fi Transmitter Frequency Range: 5.15 - 5.35GHz,
5.470 - 5.725GHz, 5.725 - 5.825GHz
•
5G Wi-Fi Transmitter Power: <20 dBm
•
5G Wi-Fi Modulation: QPSK, BPSK, 16QAM, 64QAM,
256QAM
•
5.8G Wireless Transmitter Frequency Range:
5740 - 5840MHz
•
5.8G Wireless Transmitter Power: < 8 dBm
•
5.8G Wireless Transmitter Modulation: GFSK
General
•
Power Supply: 100-240V~50/60Hz
•
Transducer: 2 x 20mm (0.8”) tweeter, 4 x 44 x 80mm
racetrack driver
•
Ethernet: 10/100Mbps
•
Dimension (W x H x D): 1020 x 60 x 93mm
•
Net Weight: 2.5kg
•
Gross Weight: 4.4kg
12 TROUBLESHOOTING
Never try to repair the product yourself. If you have any problems
using this product, check the following points before you request
service.
How can I reset the LINK BAR?
•
You can reset the LINK BAR via the settings menu. Select
Device Preference -> Reset.
What are the sound modes on the LINK BAR?
•
There are 4 sound modes, you can select in the settings
menu: Sound -> EQ mode:
a. Standard
b. Movie
c. Music
d. Voice
“Standard” sound mode is the default settings.
Will my LINK BAR enter low power-mode automatically?
•
You can set the standby in the settings menu
No sound from the LINK BAR:
•
Make sure that the LINK BAR is not muted.
•
Make sure to select the correct audio input source.
No sound from the wireless subwoofer:
•
Check if the subwoofer LED is in solid white color. Blinking
LED means a disconnection. Manually pair the subwoofer
with the LINK BAR.
Distorted sound or echo:
•
If you play audio from the TV through the LINK BAR, make
sure the TV speaker is disable or muted.
A device cannot connect with the LINK BAR.
•
Check if you enable the Bluetooth function of the device.
•
The LINK BAR is already connected to another Bluetooth
device. Press and hold
on the remote control to disconnect
and pair with a new device.
Poor audio quality from a connected Bluetooth device:
•
The Bluetooth reception is poor. Move the device closer to
the LINK BAR, or remove any obstacles between the device
and the LINK BAR.
No response to the voice command:
•
Depending on the location of your LINK BAR, the ambient
conditions may prevent the speaker from detecting the voice
command “
Hey Google
” or “
OK Google
”.
•
Try using the remote control, press the Google Assistant
button (
) and speak to the mic on the remote control.
•
Make sure the Privacyswitch is off, and the microphones are
not muted.
Summary of Contents for JBL LINK BAR
Page 1: ...LINK BAR OWNER S MANUAL ...
