background image

3

DR

AFT

DR

AFT

The IRX115s covered by this manual is not intended for use in high moisture environments. Moisture can damage the 
speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to 
direct moisture.
Keep speakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and finished 
surfaces may be degraded by long-term exposure to intense ultra-violet (UV) light. The IRX115s can generate 
considerable energy. When placed on a slippery surface such as polished wood or linoleum, the speaker may move due 
to its acoustical energy output. Precautions should be taken to assure that the speaker does not fall off a stage or table 
on which it is placed. 

HEARING DAMAGE, PROLONGED EXPOSURE TO EXCESSIVE SPL

The IRX115s is capable of generating sound pressure levels (SPL) sufficient to cause permanent hearing damage to performers, production 
crew, and audience members. Caution should be taken to avoid prolonged exposure to SPL in excess of 85 dB.

CARE & CLEANING

IRX115s may be cleaned with a dry cloth. Do not allow moisture into any of the openings in the system. Ensure that the system is unplugged 
from the AC outlet before cleaning.

THIS APPARATUS CONTAINS POTENTIALLY LETHAL VOLTAGES. TO PREVENT ELECTRIC SHOCK OR HAZARD, DO NOT REMOVE CHASSIS, 
MIXER MODULE, OR AC INPUT COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WEEE Notice

The Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law
on 14/02/2014, resulted in a major change in the treatment of electrical equipment at end-of-life. The purpose of this Directive 
is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such 
wastes so as to reduce disposal. The WEEE logo on the product or on its box indicating collection for electrical and electronic 
equipment consists of the crossed-out wheeled bin, as shown below. 15.

This product must not be disposed of or dumped with your other household waste. You are liable of dispose of all your electronic or electrical 
waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper 
recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources. 
Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. For more 
information about electronica and electrical waste equipment disposal, recovery, and collection points, please contact your local city center, 
household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment.

RoHS Compliance

This product is in compliance with Directive 2011/65/EU and (EU) 2015/863 of the European Parliament and of the Council of 19. 
31/03/2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

REACH

REACH (Regulation No 1907/2006) addresses the production and use of chemical substances and their potential impacts on human health 
and the environment. Article 33 (1) of REACH Regulation requires suppliers to inform the recipients if an article contains more than 0.1% 
(per weight per article) of any substance(s) on the Substances of Very High Concern (SVHC) Candidate List (‘REACH candidate list’).

This product contains the substance ‘’lead’’ (CAS-No. 7439-92-1) in a concentration of more than 0.1% per weight.
At the time of release of this product, except for the lead substance, no other substances of REACH candidate list are contained in a 
concentration of more than 0.1% per weight in this product.

Note: 

on June 27, 2018, lead was added to the REACH candidate list. The indusion of lead in the REACH candidate list does not mean that 

lead-containing materials pose an immediate risk or results in a restriction of permissibility of its use.

SAFETY INSTRUCTIONS

Summary of Contents for JBL IRX115S























Reviews: