Harman JBL BAR 800, Owner'S Manual

Page: 24 / 29

24 24
11. RE-CONNECT THE SUBWOOFER
The soundbar and subwoofer are paired at factories. After
power-on, they are paired and connected automatically. In some
special cases, you may need to pair them again.
3S
SUB PAIRING
5S
To re-enter the subwoofer pairing mode
1. On the rear panel of subwoofer, press and hold until it
turns fast flashing white.
2. To enter the subwoofer pairing mode on the soundbar, press
and hold on the remote control for more than three
seconds. Then, press on the remote control.
J “SUB PAIRING” : The subwoofer is ready for pairing.
J
“SUB PAIRED” : The subwoofer is connected.
NOTES:
−
The subwoofer will exit the pairing mode in three minutes and go to
standby, if pairing is not completed.
turns from fast flashing white
to off. To return to the pairing mode, press .
12. PRODUCT SPECIFICATIONS
General specification:
• Model: BAR 800 (soundbar unit)
BAR 800 SURROUND (detachable speaker)
BAR 800 SUB (subwoofer unit)
• Sound system: 5.1.2 channel
• Power supply: 100 - 240V AC, ~ 50/60Hz
• Total speaker power output (Max @THD 1%): 720W
• Soundbar output power (Max @THD 1%): 340W
• Surround speaker output power (Max @THD 1%): 2x 40W
• Subwoofer output power (Max. @THD 1%): 300W
• Soundbar transducer: 3x (46x90)mm racetrack drivers,
3x 0.75” (20mm) tweeters, 2x 2.75” (70mm) up-firing full-
range drivers
• Surround speaker transducer: 1x (46x90)mm
racetrack driver
• Subwoofer transducer: 10” (260mm)
• Networked standby power: < 2.0 W
• Operating temperature: 0 °C - 45 °C
• Lithium battery: 3.635V, 3283mAh
• Detachable surround speaker playtime: up to 12 Hours
(may vary according to content type and volume level)
HDMI specification
• HDMI video input: 1
• HDMI video output (with Enhanced Audio Return Channel,
eARC): 1
• HDMI HDCP version: 2.3
• HDR pass through: HDR10, Dolby Vision
Audio specification
• Frequency response: 35Hz - 20kHz (-6dB)
• Audio inputs: 1 Optical, Bluetooth and USB (USB playback
is available in US version. For other versions, USB is for
Service only.)
USB specification
• USB port: Type A
• USB rating: 5V DC, 0.5A
•
Supporting file formats: mp3
• MP3 codec: MPEG 1 Layer 2/3, MPEG 2 Layer 3,
MPEG 2.5 Layer 3
• MP3 sampling rate: 16 - 48 kHz
• MP3 bitrate: 80 - 320 kpbs
Wireless specification
• Bluetooth version: 5.0
•
Bluetooth profile: A2DP 1.2, AVRCP 1.5
• Bluetooth transmitter frequency range:
2400 MHz - 2483.5 MHz
• Bluetooth transmitter power: <15 dBm (EIRP)
• Wi-Fi network: IEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz)
• 2.4G Wi-Fi transmitter frequency range: 2412 - 2472 MHz
(2.4 GHz ISM Band, USA 11 Channels, Europe and others
13 Channels)
• 2.4G Wi-Fi transmitter power: <20 dBm (EIRP)