background image

14

14

6.2.2 Charge through a USB cable

100%

USB-C

*

•  Use a USB-C cable to connect the detachable speakers to 

power respectively. 

•  For the detachable speakers, the status indicator is used 

for status indication of both battery power and wireless 
connection (See “

3.2 Detachable speakers

”).

NOTES:

 

* The USB-C cable is sold separately. 

6.3  3D surround sound

6.3.1 Sound calibration

Optimize your 3D surround sound experience for your unique 
listening environment.
For sound calibration, do the following:
•  Make sure that your room is quiet;
•  Make sure that the soundbar and the two detachable rear 

speakers are fully in sight of each other, without obstacles 
in between. 

•  Make sure that the left and right rear speakers are properly 

placed, the 

L

 speaker on the left and the 

R

 speaker on the 

right. 

6.2  Charge the detachable speakers

When the detachable surround speakers are out of battery, the 
wireless connection with the soundbar will be lost.

The first time you use the two detachable speakers, charge them 
for more than 3 hours to ensure sufficient battery power.

 

J

When the battery power runs low, the status indicator flashes 

red on the detachable surround speakers and 

“REAR SPKR 

LOW BATT”

 is displayed on the soundbar.

 

J

When the battery power runs out, 

“DOCK REAR SPKR”

 is 

displayed on the soundbar. 

REAR SPKR LOW BATT

REAR SPKR LOW BATT

6.2.1 Charge by docking the detachable speakers

Charging starts when you dock the detachable speakers onto 
the soundbar.

 

J

When the soundbar switches to standby mode,   turns on; 

 turns off when the detachable speakers are fully charged.

 

J

It takes about 3.5 hours for the empty battery to be fully 
charged. 

3.5H

100%

Summary of Contents for JBL BAR 800






























Reviews: