Harman JBL BAR 700, Owner'S Manual

Page: 8 / 30

88
(available when both of the detachable rear speakers
are undocked from the soundbar)
• Select the surround sound level for rear speakers: middle
(default), high, muted or low
4) CALIBR
• Press to start sound calibration
5) (Moment)
• Press to directly access the playlist or speaker settings
that you have personalized in the JBL One app
6) (Playback controls during the music streaming over
JBL One app, Chromecast built-in™, AirPlay, Alexa Cast or
Bluetooth)
• Single press: Pause or resume playback
• Double press: Next track
• Triple press: Previous track
7) /
• Increase or decrease the volume
•
Press and hold to increase or decrease the volume
continuously
8) (Mute)
• Mute/unmute
3.4.1 App-enabled control
With the JBL One app on your Android and iOS device, you can
do the following:
• Wi-Fi setup;
• Audio calibration & demo;
• Personalize audio settings;
• Manage and control device;
• Music service integration;
• Additional features.
4. PLACE
4.1 Desktop placement
Place the soundbar, detachable speakers and subwoofer on a
flat and stable surface. Refer to the recommended distance in
the following diagram.
> 4 m /
13 ft
3 m / 10
ft
>10
cm
/ 4”
2.5-
3.0
m /
8.2-
9.8
ft
>5c
m /
2”
1-6 m/3-20 ft
1-1
.4 m
/ 3-
4.6
ft
1-1
.4 m
/ 3-
4.6
ft
L
R
NOTES:
– The power cord shall be properly connected to power.
– Do not place any objects on the top of the soundbar, detachable
speakers or subwoofer.
– Charge the detachable speakers in time to ensure sufficient battery
power (See “ 6.2 Charge the detachable speakers ”).
– Use the supplied side caps to cover the two ends of the soundbar
after you detach the rear surround speakers (See Step 5 under
“
4.2.2 Wall-mount the detachable speakers as rear surround
speakers ”).