page 5
T-Series Operation Manual
Wiring
(continued)
Bridge-Mono Wiring Using Binding Post Connectors
Bridge-mono mode doubles the output power of the amplifier.
1�
On the back panel, set the Output Mode Switch to BRIDGE.
2�
Wire the speaker to the binding post connections as shown.
3�
Only the Channel 1 Gain Control works in Bridge-mono mode.
Parallel Wiring Using Speakon
®
Connectors
With this wiring, a signal sent to one of the input connectors is paralleled to both channels so that it is reproduced by both speakers.
1�
On the back panel, set the Output Mode Switch to PARALLEL.
2�
Wire the speakers to the Speakon® connectors as shown.
T3
T3
Summary of Contents for Crown T Series
Page 13: ......