page 4
T-Series Operation Manual
Wiring
(continued)
Stereo (Dual) Wiring Using Binding Post Connectors
1�
On the back panel, set the Output Mode Switch to STEREO.
2�
Wire the speakers to the binding post connectors as shown.
Bridge-Mono Wiring Using Speakon
®
Connectors
Bridge-mono mode doubles the output power of the amplifier.
1�
On the back panel, set the Output Mode Switch to BRIDGE.
2�
Wire the speaker to the Speakon® connector as shown.
3�
Only the Channel 1 Gain Control works in Bridge-mono mode.
T3
T3
Summary of Contents for Crown T Series
Page 13: ......