17
Operation
5.
Go to the computer's
Main Hard Drive > Applications > Utilities
and
launch the
Audio MIDI Setup
application. If the Audio window doesn't
appear, select
Window > Show Audio Window
.
6.
To on-ramp signals from the computer to the BLU link bus: select the
Output
tab, select the BLU-USB from the list, then select the sample/
bit rate setting which matches the BLU link bus. If using Class 1 mode,
you MUST set the sample rate to 48000Hz. If using Class 2 mode, it is
recommended to select the "24 bit" setting for best performance.
7.
To off-ramp signals from the BLU link bus to the computer: select the
Input
tab, select the BLU-USB from the list, then select the sample rate
setting which matches the BLU link bus. If using Class 1 mode, you MUST
set the sample rate to 48000Hz. When done, close the window.
