User Manual - VPX-1401
19
Input Source Switching
VPX-1401 supports Auto and Manual Switching among the VGA and HDMI inputs.
Auto Switching
1.
When multiple sources are inserted, and power is ON for all devices, the input will be switched to the active source with
the highest priority.
2.
Priority: VGA IN 1 > HDMI IN 2 > HDMI IN 3 > HDMI IN 4
3.
When a new source is inserted, the input will be switched to it automatically, following the Last-In-First-Out rule.
4.
When the currently selected source is removed, the input will first be switched to the most recently selected port. If the
port has no active source, the input will be switched to the active source with the highest priority.
Note:
•
When in Auto Switching, Input Select buttons do not function. To use input select buttons, disable Auto Switching.
•
The Auto Switching function is enabled by default once all devices are powered on.
•
You can enable or disenable Auto Switching through command setting or WEB UI on NetLinx.
Manual Switching
If you want to select a specific input port using input selection buttons:
1.
Disable Auto Switching through command setting or WEB UI on NetLinx.
2.
Press the appropriate Input Select Button to select a desired input port. When an inactive port is selected, the VPX-1401
will output no signal.
Summary of Contents for AMX VPX-1401
