Harman AMX N3000 Series, Instruction Manual, Page: 66 / 72

Decoder Configuration Options
66
N3000 Series User Manual
Logs Page
Click the Logs link at the top of any of the main web pages to access the page shown in Figure 58 . The Logs page displays a
command log that lists all TCP and UDP messages the unit receives. It also displays the web browser’s IP address and gives you
options to Refresh and Reset Logs .
FIG. 58
Logs Page
NOTE: For security reasons, only use the Enable Maintenance Mode if instructed to by SVSI/AMX Technical Support.
LLDP Page
Click the LLDP link at the top of any of the main web pages to access the page shown in Figure 59 . The LLDP page displays
information from the Link Layer Discover Protocol (LLDP) packet which identifies the port number and the switch the device is
connected to. The Sys Name ID , Sys Description , Port ID , and Port Description fields all reflect the information that was entered
on the connected switch’s web interface.
FIG. 59
LLDP Page