Harman AMX N3000 Series, Instruction Manual, Page: 45 / 72

Encoder Configuration Options
45
N3000 Series User Manual
EDID Page
Click the EDID link at the top of any of the main web pages to access the page shown in Figure 37 . Every display has stored
information that it communicates to the output device. This page allows you to view that information.Options are described in
Table 15 . Edit the Encoder’s EDID if you need to change the display options available to the source. There are four different ways to
control the EDID of the Encoders:
Option 1: Use the default settings drop-down menu and select from the options available. Then click Set EDID . This will work for
most sources and is most often set to Stereo (2 channel) .
Option 2: When using an EDID captured from a display connected to a Decoder, paste the data in to the white EDID block,
overwriting existing EDID. Then click Set EDID .
Option 3: Make changes to the operating parameters displayed on the right side of the screen. Use the Encode button to translate
the changes into a new EDID and click Set EDID .
Option 4: Connect a compatible display to the Encoder's HDMI OUT or DVI-D OUTPUT port and click Set EDID to Pass-thru .
The source will need to be disconnected while modifying EDID settings.
FIG. 37
EDID Page
TABLE 15
EDID Page Options
Option Description
EDID drop-down box Select what EDID information to display.
Pass-thru: Displays EDID information for the display connected to the Encoder’s pass thru port.
Local (Digital/Analog) : Displays EDID information for the Encoder. This information is being provided to the
source connected to the Encoder.
Decode button Click to translate the EDID currently displayed on the left to the operating parameters listed on the right.
Encode button After making any changes to the operating parameters listed on the right, click this button to update the EDID
information on the left. To store the new settings, click Set EDID .
Read EDID Click to initially show the EDID or to refresh the EDID table if the source EDID has changed.
Set EDID If creating a custom EDID, click to apply the changes.
Set EDID to Pass-thru Set the EDID to the pass-thru EDID of the connected display to the HDMI OUT or DVI-D OUTPUT port.
Reset EDID For Digital , choose a standard EDID from the drop-down menu and click Reset EDID to apply. For Analog , no
selection is necessary.