Audio/Video Configuration
63
Instruction Manual - Enova DVX-325xHD/22xxHD All-in-One Presentation Switchers
Master Controller Configuration Options
The 3200-series DVXs feature a NetLinx central controller functionally equivalent to an NX-3200. The 2200-series DVXs feature a
NetLinx central controller equivalent to an NX-2200. The DVX provides the same set of configuration pages that are available to the
NX-series controllers.
NOTE:
Programming Guide (available at www.amx.com).
WebConsole - System Configuration
The DVX (and all other NetLinx Masters) features a built-in WebConsole that allows you to make various configuration settings via a
web browser on any PC that has access to the Master.
The webconsole consists of a series of web pages that are collectively called the "Master Configuration Manager" (FIG. 67).
The webconsole is divided into three primary sections, indicated by three control buttons across the top of the main page (FIG. 68):
FIG. 68
System Configuration Menu Options
Home
: This option appears when you access the System Configuration page. Use these options to view any connected
device or access a module.
Network
: Click to access the Network Settings for the Master. The options on these pages enable you to view and modify
the IPv4 and IPv6 network settings and the clock settings for the system.
Security
: Click to access the System Security page. The options in this page allow you to configure various aspects of
NetLinx System and Security on the Master, including network configuration and creating users and roles.
System
: Click to access the System Details page. The options on this page allow you to view and configure various aspects
of the NetLinx System.
Modules
: Click to access several different device-related pages.
Switcher
: Click to access the Enova Switcher Configuration page.
WebConsole User Interface - Additional Documentation
Using a Web Browser
You can access the configuration settings for the All-In-One Presentation Switcher by using the latest, industry-accepted version
of HTML5 web browsers. If a browser is inconsistent, upgrade or try a different browser. The system configuration pages are
available by entering the IP address of the NetLinx master into the location bar of your web browser. Entering your IP address into
your web browser opens the Main WebControl page (FIG. 69).
FIG. 69
Main WebControl page
Perform these steps to access the configuration settings:
1.
Open a web browser.
2.
Enter the IP address of the All-In-One Presentation Switcher in the location bar of the web browser. (If you do not know your
switcher’s IP address, see the
Locating the IP Address of the DVX
section on page 64.) The Main WebControl page opens
NOTE:
WebControl requires that you install the latest version of the Adobe Flash Player plug-in for your browser. If your browser does
not have the Flash Player plug-in installed, you will be prompted to install it.
3.
Click the Switcher tab to open the Enova DVX Setup page (FIG. 70).
If a web browser or Flash Player is not available, the All-In-One Presentation Switcher's front panel and NetLinx commands
provide equivalent controls for audio/video configuration. See the
for more
information.
