Audio/Video Configuration
64
Instruction Manual - Enova DVX-325xHD/22xxHD All-in-One Presentation Switchers
Locating the IP Address of the DVX
You can locate the IP address of the DVX by using the buttons on the front panel of the unit. The IP address appears on the LCD
display on the front panel of the DVX. Perform these steps to locate the IP address of the unit:
1.
Press the
STATUS
button on the front panel of the unit. The Status menu appears on the LCD display.
2.
Use the
UP
and
DOWN
navigational arrow buttons to navigate through the options until you locate the All-In-One
Presentation Switcher’s IP address. Note the IP address for future reference.
NOTE:
You can use the Status Menu to verify current TCP/IP settings using the UP and DOWN navigational buttons.
Default User Names and Passwords
The following table lists the default user names and passwords for accessing the DVX through NetLinx Studio or the WebConsole.
General Options
The WebConsole Configuration page contains settings that are accessible from each tab. FIG. 70 indicates the universally
accessible options available on the web pages.
FIG. 70
WebConsole Configuration page
The following table lists the general options for the WebConsole Configuration page:
Default User Names and Passwords
User Name
Password
NetLinx Studio
netlinx
password
WebConsole
administrator
password
General Options
Mute
Turns off the audio for the device.
Amp Volume
Sets the output volume.
Refresh
Click to reload all settings.
Reset to Defaults
Click to reset the current page’s settings to its factory default.
Amp Volume and Mute
Refresh
Reset to Defaults
